Two Additional Levels of Chain Wire Fences Introduction

In the internal area where all the personnel are housed, two additional levels of fences:

  • Chain Link Fence (Type 1)
    Chain link fence with extension arms, holding three strands of four-point pattern barbed wires are around the perimeter of the whole life support camp.
    The fence is 2.5 m high excluding the extension arms.
    Concertina barbed tape is for the whole length of the fence inside the extension arms.
    Chain link fence is as per drawing no.SK-SAJ-006 "Typical drawing for fencing and gates – Type 1" and specification no.SK-SAJ-002 "Camp & with section details".
    Material:
    • Steel works: ASTM A36 or equivalent.
    • Bolts: ASTM A325 CI.8.8.
  • Chain Link Fence (Type 2)
    Chain link fence has different areas as indicated on SK-SAJ-001 "camp and prefabrication yard general Layout".
    The fence is 2.5 m high.Emergency gate equipped with anti panic touch bar correspondence of any "muster point". Chain link fence is as per drawing no. SK-SAJ-007 "Typical drawing for fencing and gates – Type 3" and specification no. SK- SAJ-002 "Camp &prefabrication".
    Material:
    • Steel works: ASTM A36 or equivalent.
    • Bolts: ASTM A325 CI.8.8.